Dallas Temperature Sensor
The dallas_temp component allows you to use
DS18B20
(datasheet)
and similar 1-Wire temperature sensors. A 1-Wire bus is
required to be set up in your configuration for this sensor to work.
# Example configuration entry
sensor:
- platform: dallas_temp
address: 0x1234567812345628
name: temperature
update_interval: 120sConfiguration variables
address (Optional, int): The address of the sensor. Required if there is more than one device on the bus.
resolution (Optional, int): An optional resolution from 9 to 12. Higher means more accurate. Defaults to the maximum for most Dallas temperature sensors: 12.
update_interval (Optional, Time): The interval that the sensors should be checked. Defaults to 60 seconds.
one_wire_id (Optional, 1-Wire Bus): The ID of the 1-Wire bus to use. Required if there is more than one bus.
All other options from Sensor.
